Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2740
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
Nomenclature of HSS Gear Shaping Cutter
Nomenclature of HSS Gear Shaping Cutterwe are designing and producing module and dp gear shaper cutt... - Hobs for spur and helical gears
- HSS M2E, M35, M42, ASP30, ASP52, S390 Module and DP Gear Shaping Tool with TiN, TiALN, AP
- Low Speed Bore Type Solid Carbide Hob for Soft Tooth Oil Cutting
- Shank Type Worm Wheel Hob with Module m4.5
- PA30° PCD 125mm Deep Counterbore-Type Gear Shaper Cutter with Module m8~m10
- Shank-type gear shaping cutter with DIN 5482
