Taper Shank Type Shaper Cutters with GB 6081
2023-04-06 08:19:39
jiangxingTools
2488
Taper Shank Type Shaper Cutters with GB 6081
These shank type shaper cutters are 20° PA, non-topping finishing cutters, for spur gears.
tooth profile can be done with GB 6082, DIN 1829, JIS B 4356, and BS 5246
Nominal pitch dia. 25mm, 38mm, module range: m1-m3.75
Diametral pitch shank type shaper cutter can be made as your request.
morse stub taper number is No. 2 or No.3
相關(guān)文章
-
?PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16
PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16Material：HSS M2,M35, M42, S390Mo... - Timing Pulley Hob for G.T
- GB STD Disk Type Straight Tooth Gear Shaper Cutter
- Shank Type Worm Wheel Hob with Module m4.5
- Hobs for spur and helical gears
- Gear Hobs for Straight Splines
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
