PA20° Standard Involute Gear Milling Cutter with Module m3.25
2022-06-22 15:29:39
jiangxingTools
2627
PA20° Standard Involute Gear Milling Cutter with Module m3.25
Module: m3.25, pressre angle: 20°
Dimensions of involute gear cutter : D 75 x d 27 x Z 12
8pcs as a full set, No.1~No.8
Involute profile to GB standard
Material: HSS M2, M35
相關文章
-
Bohler S500 for Shaper Cutters and Hobs
Bohler S500 for Shaper Cutters and HobsMaterial composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.... - HSS Erasteel Bohler M35 Material DP and Module Gear Hob Cutter with AP Coating
- HSS gear hob cutter with relief ground DIN 8002 B
- Shank Type Worm Wheel Hob with Module m4.5
- PA20° DP20 Standard Module Gear Hob with BPⅡ
- Disk Type Shaper Cutters with DIN 1825
- HSS M2, M35 Timing Belt Pulley Gear Hob with TiN, TiALN Coating
